Filter
Top Products
14 VMA5894 and VMA7194
• Always use great care when attaching anything to a vehicle!
Visually inspect all sides of any potential screw location to
ensure no damage will occur.
WARNING!
NEVER install this monitor where it is
visible from the driver’s seat, or where
it could injure any vehicle occupant in
case of an accident. Ensure that your
installation does not create risk of
head-strike injury, and that the monitor
will remain securely mounted in the
case of an accident or sudden maneu-
ver.
Installing the monitor
These TFT LCD monitors are designed for custom installation.
While a basic flush-mount bezel is supplied, you may need
parts that are not included (depending on your installation).
Clarion also offers optional mounting kits:
• The ZMT003 is a flexible gooseneck mount.
• The PQE023 positions the monitor on the back of a vehicle
headrest.
Note:
The Clarion HRM100 and HRM150 headrest mounting kits
are not compatible with this monitor.
Flush mounting in the headrest
You may use the included trim bezel to flush-mount the
monitor.
1. Ensure that you will have sufficient clearance for the
monitor and its rear-located wiring harness.
2. Cut the opening.
3. Route the DIN-connector end of the wiring harness into the
opening from the rear out the front.