Filter
Top Products
16 VMA5894 and VMA7194
Removing the monitor from the bezel
To remove the monitor from the bezel, insert a flat card (such
as a credit card) between the monitor case and the side of the
bezel to release the spring clips.
Insert card
Custom Mounting using the threaded insert
The monitor base has a threaded insert (1/4 - 20) that can be
used with the optional Clarion ZMT009 gooseneck mounting
kit or with a 1/4 -20 machine screw in custom applications.
Wiring the monitor
Precautions
• Disconnect the negative battery terminal before making any
wiring connections.
• Be particularly careful where you route wires. Keep them
away from the engine, exhaust system, etc. Heat may
damage wires.
• If the fuse should blow, make sure all connections are
correct and no wires are damaged before replacing the
fuse. Always use fuses that are the same amperage value
as the original. When replacing a fuse, never let the battery
side touch any metal part or any other wire.