Filter
Top Products
VMA5894 and VMA7194 15
4. Insert the trim bezel and route the wiring harness through
the opening in the rear.
5. Firmly attach the bezel to the mounting surface and/or to
the interior of the mounting surface.
Mounting
screw
holes
Wire harness opening
Mounting
tabs
6. Connect the wiring harness to the monitor, and tuck the
excess wiring harness length carefully out of the way
behind the bezel.
7. Gently insert the monitor into the bezel.
Press only on the edges of the monitor, not on the screen.
You should hear a few soft clicks as the monitor locks into
place.
CAUTION!
NEVER press on the surface of the
screen! Gently press on the edges of
the monitor case. If you find that you can-
not insert the monitor without excessive
force, you may need to check your wire
harness position for interference with the
insertion process. You may also need
make the opening slightly larger.