Filter
Top Products
VRX925VD 35
English
Owner’s manual
Switching angles
On DVD discs in which video images have been
recorded in two or more angles, you can switch
among the angles during playback.
1. Display the sub KEY PAD using the proce-
dures described in the section “KEY PAD
operation”.
2. Touch the [ANGLE] key during playback.
Each time you touch the key, you can switch
among angles.
• Depending on the disc, up to 9 angles may
be recorded. For details, see the mark of
the disc (
: Indicates multi-angle).
• Depending on the disc, angles may switch
smoothly or switch with a momentary still
image.
• When the power is turned on and when the
disc is changed with new one, the lan-
guage set at the time of factory shipment is
selected. If that language has not been re-
corded, the language specified on the disc.
• Depending on the disc, switching may be
completely impossible or impossible on
some scenes.
• It may take time to switch among angles.
• Depending on the disc, scenes recorded in
two or more angles may be played back.
Displaying the playback status
1. Press the [DISP] button during playback.
Each time you press the button, you can
switch between display (ON) and non-display
(OFF) of the playback status.
DVD Video Player Operations
TITLE ELAPSED TITLE REMAIN
CHAPTER REMAIN CHAPTER ELAPSED
• Depending on the playback status or disc,
the following indication may appear.
2. Display the sub KEY PAD using the proce-
dures described in the section “KEY PAD
operation”.
3. Press the [KEY PAD] button and touch the
[P.TIME] key during playback.
Each time you touch the key, you can switch
among time display.
• CHAPTER ELAPSED:
Elapsed time of the chapter
• CHAPTER REMAIN:
Remaining time of the chapter
• TITLE ELAPSED:
Elapsed time of the title
• TITLE REMAIN:
Remaining time of the title
Watching a video CD
After disc loading, the play mode is automati-
cally engaged.
• Button operation may not be allowed depend-
ing on the story of the disc.
■After the menu screen is displayed
For V-CD discs equipped with the PBC (Play
Back Control) function, the menu screen ap-
pears. After the menu screen is displayed, select
an item in the following operations and play it
back.
Showing the V-CD menu (for V-CD
discs with PBC)
This key does not function on some discs.
1. Press the [MENU] button during playback.
The V-CD menu appears.
The displayed contents may differ, depending
on the V-CD software.
• Example showing menu display
∗ To select the menu contents, press the [KEY
PAD] button and use either the “Cross KEY
PAD” or the “Ten KEY PAD” according to the
disc contents menu.