Filter
Top Products
50 VRX925VD
English
Owner’s manual
Seek tuning
1. Press the [BAND] button and select the
desired TV band (TV1 or TV2).
∗ If “MANU” is lit in the display, press and hold
the [BAND] button for 1 second or longer.
“MANU” in the display goes off and seek
tuning is now available.
2. Press the [d] or [a] button to automatically
seek a station. Press the [d] button to
automatically tune up the frequency band to
the next available TV station; press the [a]
button to automatically tune down.
∗ When the panel is open, the same operation
is also available by using the [a] or [d]
button in the panel.
Selecting stations with the KEY
PAD
∗ This function displays the KEY PAD on the screen
enabling you to tune in through auto store, preset
scan or by entering a frequency.
Press the [KEY PAD] button to display the KEY
PAD.
TV Operations
Manual tuning
There are 2 ways available: Quick tuning and
step tuning. When you are in the step tuning
mode, the frequency changes one step at a
time. In quick tuning mode, you can quickly tune
the desired frequency.
1. Press the [BAND] button and select the
desired band. (TV1 or TV2)
∗ If “MANU” is not lit in the display, press and
hold the [BAND] button for 1 second or longer.
“MANU” appears in the display and manual
tuning is now available.
2. Tune into a station.
●Quick tuning:
Press and hold the [d] or [a] button for 1
second or longer to tune in a station.
●Step tuning:
Press the [d] or [a button to manually tune in
a station.
Note:
•
Manual tuning is cancelled if you do not operate the
unit for 7 seconds longer. (
∗
Only when connecting
the TTX7503Z or TTX7504Z with this unit)
Recalling a preset station
A total of 12 TV stations can be stored (6-TV1
and 6-TV2). This allows you to select your
favorite TV stations and store them in memory
for later recall.
There are 2 ways available to recall the preset
station.
●Using the [DIRECT] buton.
1. Press the [BAND] button and select the
desired TV band. (TV1 or TV2)
2. To recall a stored TV station, press the
desired [DIRECT] button to select that
station.
∗ Press and hold one of the [DIRECT] buttons
for 2 seconds or longer to store the current
station into the preset memory.
●Using the [DIRECT] key.
1. Press the [LIST] button or touch the screen
when the STANDARD screen is displayed,
then touch the [P.CH SELECT] key.
2. Touch the corresponding [DIRECT] key to
recall the stored station.
∗ You can select the desired band to touch the
[BAND] key.
3. Touch the [RTN] key or press the [LIST]
button to return to the previous mode.
●Tuning in by selecting a frequency
1. Touch the [SRCH] key to switch the KEY
PAD.
2. Touch the [0]~[9] key corresponding with the
frequency you desired. When you touch the
wrong number ([0]~[9] key), you can cancel
that to touch the [DEL] key.
3. Touch the [ENT] key. The radio station you
required would be tuned.
●To use auto store,
touch the [AS] key for about 2 seconds.
●To perform a preset scan,
touch the [PS] key.
●To cancel the KEY PAD display,
press the [KEY PAD] button or touch the [OFF]
key.