Filter
Top Products
15
English
DXZ468RMP
Radio Mode Operations
Listening to the radio
1. Press the
[
SRC
]
button and select the radio
mode, then the radio will be on.
2. To select a preset band, press the
[
BND
]
button, then select one of the preset bands
such as FM1, FM2, FM3 or AM. Every time
the
[
BND
]
button is pressed, the display will
change as:
FM1 FM2 FM3 AM FM1...
3. Press the
[
,
]
lever upward or downward
to tune in the desired station.
Seek tuning
There are 2 types of seek tuning: DX SEEK and
LOCAL SEEK.
DX SEEK can automatically tune in to receivable
broadcast stations; LOCAL SEEK can tune in to
only broadcast stations with a good reception
sensitivity.
1. Press the
[
BND
]
button and select the desired
band
(
FM or AM
(
MW, LW
))
.
2. Tune into a station.
∗ If “MANU” is lit in the display, press and hold
the
[
BND
]
button for 1 second or longer.
“
MANU” in the display goes off and seek tuning
is now available.
∗ If “TA” is lit in the display, TP stations are auto
-
matically sought.
• DX SEEK
Press the
[
,
]
lever upward or downward
to start automatic station tuning.
When the lever is pressed upward, search will be
performing in the direction of higher frequencies.
When the lever is pressed downward, search
will be performed in the direction of lower
frequencies.
∗ When seek tuning starts, “DX SEEK” appears in
the display.
• LOCAL SEEK
If the lever is pressed upward or downward and
held in position for 1 second or longer, local seek
tuning will be enabled. Broadcast stations with
good reception sensitivity are selected.
∗ When local seeking starts, “LO SEEK” appears in
the display.
Adjusting MAGNA BASS EX
The MAGNA BASS EX does not adjust the low
sound area like the normal sound adjustment
function, but emphasizes the deep bass sound
area to provide you with a dynamic sound.
∗ The factory default setting is off.
1. Press and hold the
[
A-M
]
button for 1 second or
longer to turn on the MAGNA BASS EX effect.
“M-BASS EX ON” lights in the display.
2. Press and hold the
[
A-M
]
button for 1 second or
longer to turn off the MAGNA BASS EX effect.
“M-BASS EX OFF” lights in the display.
Basic Operations
CT
(
Clock Time
)
function
The CT function receives CT data sent from an
RDS station and displays the time. Press the
[
D
]
button to switch to the CT display.
∗ If a CT data is not being received, “--:--CT” appears
in the display.
Note:
• CT data is not transmitted in some countries and
by some broadcast stations. Also, in some areas,
the CT may not display accurately.