Filter
Top Products
iPod Operations
English
30 DXZ585USB
● To cancel the trick play
2. Push the [SEEK PANEL] leftward or
rightward to select “RPT OFF” or “RDM
OFF”.
3. Press the [ ] button.
Notes:
• When the repeat play mode is canceled, after
play all tracks within a selected category,
playback will begin from the first track in the
selected category.
• When playing the last track within a selected
category in Random mode, if ACC is switched off
then on again, playback will begin from a
different track.
• Though the default setting of an iPod is “All
Repeat”, the indication on the mode status is not
displayed.
Selecting category from the iPod
menu
1. Press the [MENU] button.
The iPod menu categories will be displayed.
2. Press the [UP] or [DN] button to switch
between categories.
The iPod menu categories alternate in the
following order:
“PLAYLISTS” ↔ “ARTISTS” ↔ “ALBUMS”
↔ “SONGS” ↔ “GENRES” ↔
“COMPOSERS” ↔ “PLAYLISTS” ...
Notes:
• The iPod menu mode can be canceled by
pressing the [MENU] button.
• In iPod menu mode, if you push the [SEEK
PANEL] or press the [UP] or [DN] button fast,
playback may not be performed.
3. Push the [SEEK PANEL] rightward to select
the category.
4. When the track name display is showing,
push the [SEEK PANEL] rightward.
Playback will begin from the first track in the
selected category, and the iPod menu mode
will be canceled.
∗ Subfolders may be displayed, depending on
the category.
In this case, press the [UP] or [DN] button to
switch between subfolders, then push the
[SEEK PANEL] rightward to select the desired
subfolder.
∗ When the track name display is showing,
pushing the [SEEK PANEL] leftward will
return to the currently playing folder name
display.
5. Press the [UP] or [DN] button to select a
track within a category.
6. Push the
[SEEK PANEL] rightward to play the
desired track.
About title display
This unit supports the display of title information
transmitted from a connected iPod.
• Character code information is UTF-8;
displayable characters include English
alphanumerics, some symbols, and some
umlaut characters.
• Unsupported characters will be replaced by
asterisks (*).