Filter
Top Products
English
35 DXZ585USB
TV Operations
Note:
• The following operations are performed the same
as for radio mode:
∗Channel selection
∗Storing channels in memory
∗Calling channels from memory
∗Auto store
∗Preset scan
See “Radio Operations” (page 17-18) for
details.
TV tuner functions
When an optional TV tuner is connected through
the CeNET cable, this unit controls all TV tuner
functions. To watch TV requires a TV tuner and
monitor.
Watching a TV
1. Press the [SRC] button and select the TV
mode.
2. Press the [MENU] button to select the
desired TV band (TV1 or TV2). Each time the
button is pressed, the input selection toggles
between TV1 and TV2.
3. Push the [SEEK PANEL] leftward or
rightward to tune in the desired TV station.
Watching a video
The TV tuner has a VTR input terminal to which
1 external device can be connected. Connect a
12 V video cassette player (VCP) or video
cassette recorder (VCR) to the TV tuner input
terminal.
1. Press the [OPTION] button.
2. Push the [SEEK PANEL] leftward or
rightward to select “TV/VTR”.
3. Press the [ ] button to enter the VTR
mode.
4. To return to the TV broadcast, press the
[OPTION] button.
5. Press the [ ] button to return to the
TV mode.
Setting the TV diver
You can change the reception setting for the TV
antenna connected to the TV tuner.
1. Press the [OPTION] button to switch to the
adjustment selection display.
2. Push the [SEEK PANEL] leftward or
rightward to select “TV DIVER”.
3. Press the [UP] or [DN] button to set to “ON”
or “OFF”.
•ON:
Sets the diver setting to ON.
•OFF:
Sets the diver setting to OFF.
4. Press the [OPTION] button to return to the
previous mode.