Filter
Top Products
HX-D2 17
English
Operations Common to Each Mode
Adjusting the filter (FILTER/X-
OVER)
The filter can be adjusted for each speaker. For
details, see "About filter settings" (page 18).
∗ The filter can be adjusted when the Audio mode is
the Standard mode or the Multi mode.
1. Press the [ADJ] button.
2. Press the [ ] or [ ] button to select
"SOUND".
3. Press the [s] button.
4. Press the [ ] or [ ] button to select
"FILTER" or "X-OVER".
∗ Select "FILTER" when the Audio mode is the
Standard mode, and "X-OVER" when the
Audio mode is the Multi mode.
5. Press the [ ] or [ ] button to select "
FRONT" or " HIGH".
∗ Select " FRONT" when the Audio mode is
the Standard mode, and " HIGH" when the
Audio mode is the Multi mode.
6. Press the [ ] or [ ] button to select the
speaker to adjust.
∗ The mute function of a selected speaker can
be turned ON/OFF by pressing the [ROTARY]
knob while the speaker is selected.
Each press of the buttons switches the setting
as follows:
In the Standard mode:
FRONT
FRONT
REAR
SUB-W
7. Press the [ ] button.
8. Press the [ ] or [ ] button to select the
speaker adjustment item. Each press of the
buttons switches the adjustment item.
fc LPF (filter frequency of low-pass filter)*
SLP LPF (filter slope of low-pass filter)*
fc HPF (filter frequency of high-pass filter)*
SLP HPF (filter slope of high-pass filter)*
G (gain)*
PHASE (phase)*
* Sometimes this is not displayed depending on the
selected speaker.
9. Press the [s] button. The setting value
blinks.
10.Press the [ ] or [ ] button to adjust the
setting.
∗ For details of the adjustment ranges of each
adjustment item, see "About filter settings"
(page 18).
11.When you have finished the adjustment,
press the [s] button to return to the
screen in step 8. This sets the setting value.
12.Repeat steps 8 to 11 to adjust the
adjustment items for the selected speaker.
13.When you have finished the adjustment,
press the [ ] button to return to the screen
in step 6.
14.Repeat steps 6 to 13 to adjust the filter of
each speaker.
15.Press the [ADJ] button to return to the
previous mode.
In the Multi mode:
HIGH
MID
LOW
SUB-W
Blinking