Filter
Top Products
28 HX-D2
English
Auto store
Auto store selects 6 TV stations automatically
and stores each one into preset memory.
If there are not 6 stations with good reception,
stations previously stored in memory remain
and only the strong stations are stored into
memory.
1. Press the [BAND] button and select the
desired TV band (TV1 or TV2).
2. Press and hold the [P/A] button for 2
seconds or longer. The stations with good
reception are stored automatically to the
preset channels.
Preset scan
Preset scan allows the user to view each preset
position before it automatically advances to the
next preset. This function is useful for searching
for a desired TV station in memory.
1. Press the [P/A] button.
2. When the desired station is found, press the
[P/A] button again to remain tuned to that
station.
Note:
• Do not press and hold the [P/A] button for 2
seconds or longer. Doing so will trigger the auto
store function and start storing stations into
memory.
Setting the TV diversity (TV DIVER)
This function automatically switches to reception
by a good-reception antenna during reception of
TV broadcasts (when a TV tuner is connected).
* The factory default setting is "ON". Set again to
"OFF" when the TV diversity antenna is not in use.
1. Press the [ADJ] button.
2. Press the [ ] or [ ] button to select "TV
DIVER".
3. Press the [ ] or [ ] button to select "ON" or
"OFF".
4. Press the [ADJ] button to return to the
previous mode.
TV Operations
Setting the TV area
When you selected the TV area (TV reception
area), the TV tuner area setting changes.
1. Press the [ADJ] button.
2. Press the [ ] or [ ] button to select "TV
AREA".
3. Press the [ ] or [ ] to select the reception
area.
4. Press the [ADJ] button to return to the
previous mode.
The above operations are required when a TV
tuner other than TTX7501z is connected.