Filter
Top Products
OPERATING THE HEADPHONES
1. Power switch
Press to activate the headphones. The power on the headphones will turn off automatically, if an
audio signal is not detected for over a minute.
2. Source selector switch
Switches between the audio sources.
3. Volume adjustment switch
Adjusts the volume of the sound in the headphones
Note:
• Headphones are not to be worn by the operator of the
vehicle when driving.
• Do not leave the headphones in a place subject to direct
sunlight or extreme temperatures.
• If the headphones are exposed to direct sunlight for an
extended period of time, the sensitivity of the IR receiver
maybe affected causing poor sound quality. Allow
headphones to cool off before using.
Battery Installation
1. Slide the battery cover door downwards.
2. Insert 2 new “AAA” batteries into battery holder, following the diagram inside the battery holder.
3. Slide the battery cover door back onto the headphones. Note:
When the batteries become weak in the headphones, the audio
can sound distorted or cut in and out.