Filter
Top Products
OPERATING OHM102/OHM153 MONITOR
In the event a problem arises with the OHM102/OHM153 overhead monitor system, do not
attempt to disassemble or repair the monitor yourself. Opening or attempting to service the
monitor will void the warranty; instead contact a local Clarion dealer for assistance.
Monitor Control Panel
1. PIP (Picture In Picture) button
Press the PIP button to enable Picture In Picture or split screen operation.
2. MENU button
Press the MENU button to access the monitor adjustments.
FM MOD ON/OFF>Brightness>Contrast>Saturation>Hue>Sub Size>
Sub Position> Default Reset.
3. DOWN button
MENU, then DOWN selects item
to be adjusted.
DOWN: Also selects Main AV source.
4. UP button
MENU, then UP selects item to be adjusted. UP: Also
selects Sub Screen AV source.
5. DIMMER button
Press to adjust the brightness of the screen.
6. MODE button
Press to change the screen format: Normal, Full, Zoom, and
Wide.
7. OPEN button
Press to open the overhead monitor.
8. IR Transmitter for wireless headphones and IR Receiver for remote control
Note: Also functions as the dome light ON/OFF switch for the OHM102 only.
9. Dome light switch
Dome light switch for the OHM153
10. Dome lights