Filter
Top Products
Closing the Overhead Monitor
Gently push the backside of the monitor until it clicks into the overhead monitor housing.
The monitor will turn off automatically when it is returned to the closed position.
Note: Do not place any objects between the monitor and the monitor housing, this can result
in serious damage to the monitor.
Adjusting the Tilt and Swivel (OHM102 only)
The monitor can be opened to a maximum of 110 degrees.
Exceeding this point can cause serious damage to the
monitor and monitor housing. Note: The OHM102 has the
capability of swiveling the monitor left and right. Prior to
closing the monitor, it is important that the monitor be
returned to the center position.
Setting the Screen Mode
The OHM102/OHM153 has 4 different screen modes: NORMAL, WIDE, ZOOM, and FULL.
Pressing the MODE button on the front control panel or the remote control can access the
different screen modes. The current mode is displayed on the screen first. Each time the MODE
button is pressed, the screen mode switches in the following sequence: