Filter
Top Products
35
English
Owner’s manual
7-2-6 2-ZONE Function
(1) Description
The 2-ZONE function is a function that outputs separate sounds/images from the MAIN zone
and SUB zone (such as the rear monitor) by simultaneously operating two sources in the one
centre unit. Thereby, plural listeners are allowed to enjoy separate audio/visual sources. The
2-ZONE function allows internal sources (TUNER, DVD, iPod) and external sources (AUX, etc.)
to be played on MAIN zone and SUB zone. Controlling sources of MAIN zone and SUB zone can
be made from the main unit and from the remote control unit. The source sounds of the MAIN
zone are played back from the speakers of the vehicle side, and those of the SUB zone are from
the wireless headphone. Sound volume control on the SUB zone is performed by the wireless
headphone.
When you run the products for the first time, 2-ZONE function is set to the OFF, both of the main-
zone and sub-zone are set to the main source. If you press the [SOUND] button more than a
second, it will turn into the 2-ZONE source screen.
2-ZONE mode : OFF, DVD(CD), AUX, iPod
(3-4) AUTO PANEL
•ON : The LCP houses automatically after removing the DCP.
The LCP opens automatically after attaching the DCP.
(Automatic OPEN/CLOSE of the LCP)
•OFF : Regardless of the removal or attaching of DCP, the LCP is worked by the settings of the
user. (Passive OPEN/CLOSE of the LCP)
•CLOSE : Set up the LCP automatically only after removing the DCP.
(Automatic CLOSE of the LCP)
(3-5) TEL SWITCH
•To set up the mobile phone interruption
• When you connect your mobile phone to this unit using a separately sold cable, you can listen to
your telephone calls on your car speakers.
•ON : To listen to your telephone calls from the speakers connected to this unit (When listening to
your car speakers, you can adjust the volume level.)
•OFF : To continue normal operation even when you use the telephone calls (When you set this
function to “OFF”, disconnect the mobile phone from the cable or turn off the power of the
mobile phone.)
•MUTE : To mute the sound during your telephone (This function is not compatible with all mobile
telephones. Contact your local authorized Clarion dealer for information on proper
installation and compatibility.)
(3-6) TEL SPEAKER
•To change the output speaker for the mobile phone when TEL SWITCH is “ON”
•During the mobile phone interrupts, setting this function is disabled.
•[LEFT] : To hear your telephone calls from the left speaker connected to this unit
•[RIGHT] : To hear your telephone calls from the right speaker connected to this unit