Filter
Top Products
60
English
Owner’s manual
(3) GENERAL CAUTIONS
① Do not open the case. There are no user serviceable parts inside. If you drop anything into the
unit during installation, consult your dealer or an authorized CLARION service
② Use a soft, dry cloth to clean the case. Never use a rough cloth, thinner, benzine, or alcohol,
etc. For tough dirt, apply a little cold or warm water to a soft cloth and wipe off the dirt gently.
(4) CAUTIONS ON INSTALLATION
① Prepare all articles necessary for installing the main unit before starting.
② This model is used with the LCD panel slide forwards (shell loading system). On some types
of cars, the LCD panel may touch the dashboard or shift lever, in which case it cannot be
installed. Check that the set will not hamper operation of the shift lever before choosing the
place of installation.
③ Install the unit within 30° of the horizontal plane.
④ If you have to do any work on the car body, such as drilling holes, consult your car dealer
beforehand.
⑤ Use the enclosed screws for installation. Using other screws can cause damage.
⑥ The source unit has mounting screw holes for NISSAN (N marks) and TOYOTA(T marks)
vehicles.
Dashboard
Shift lever
(check that it does not
touch the LCD.)
Chassis Chassis
Damage
Max. 8mm (M5 screw)
Shift lever