Filter
Top Products
37
English
Owner’s manual
AREA BAND
RECEIVING STEP STEP
IF(Hz)
BAND(Hz) SEEK(KHz) MANU(KHz)
FM1,2,3
87.5~108.0M 100 50
10.7M
EUROPE
AM(MW/LW)
LM 153~279 K 3 3
450K
7-3 Radio
(1) Listening to the radio
① Press the [SOURCE] button and touch the [TUNER] key. The TUNER mode screen is
displayed.
② Press the [BAND] button on the remote control unit, or touch the [BAND] key to select the radio
band. Each time the key is touched, the radio reception band changes in the following order:
FM1 ▶ FM2 ▶ FM3 ▶ MW ▶ LW ▶ FM1 …
The default setting is “FM1”.
③ Touch the [|
◀◀
] or [
▶▶
|] key to seek up or seek down.
If you keep touching the [|
◀◀
] key, manual tuning will be done in the direction of lower
frequencies. If you keep touching the [
▶▶
|] key, manual tuning will be done in the direction of
higher frequencies.
④ FREQUENCY MAP
(3) Specification of conversion
• When the 2-ZONE function turns on, the source of the main-zone and the sub-zone is made up
by the mixture besides of the external source.
• The source conversion of the main-zone is available when the 2-ZONE setting mode sets up to
the main-zone.
• The source conversion of the sub-zone is available when the 2-ZONE setting mode sets up to
the main-zone.
•The source conversion of the main-zone and sub-zone is like below.
※3 DVD
VISUAL(AUX)
※2 iPOD (VIDEO) RADIO USB
RADIO ※1 Y ※1 Y ※1 Y N N
DVD Y Y Y N N
VISUAL(AUX) Y Y N N N
iPOD Y Y Y N N
USB Y Y Y N N
MAIN
SUB
NOTE
※1 : Receiving condition of some stations may be altered in 2-ZONE mode.
※2 : To select the video mode of iPod when you watch in sub-zone.
※3 : DVD operation can be done only in the main-zone.