Classe Audio AMP5 Car Amplifier User Manual


  Open as PDF
of 28
 
20
name You can set the name thatthiscomponentwillbelistedunderintheCAN-Bus
devices screen. e name will appear next to the unit model and serial number,
and facilitate the identication of units in large systems.
global brightness By setting all your components to global brightness you can adjust the
touchscreen and LED brightness for your entire system by changing the
brightnessofasingletouchscreen.AllCAN-Bussoftwareupdatesautomatically
set the updated unit to Global Brightness. If you want a particular unit to be
excluded from Global Brightness, deselect Global Brightness for that unit.
global standby By setting all your components to global standby you can bring your entire
system in and out of standby by pressing the standby button of any unit or
remote.AllCAN-Bussoftwareupdatesautomaticallysettheupdatedunitto
global standby. If you want a particular unit to be excluded from global standby,
deselect global standby for that unit.
CAN-Bus model-
specific features
efollowingCAN-Busfeaturesaremodelspecic.
PlayLink is feature is exclusive to Delta series disc players and will only function if
thediscplayerisconnectedtoaCAN-Busenabledpreamporsurroundsound
processor.
When PlayLink is active, pressing play on the disc player will also automatically
switch the preamp/processor to a specied input. is means that you can listen
to a CD or watch a DVD literally at the touch of a button.
e rst step in using PlayLink is to choose the input you wish to be selected
when play is pressed on the disc player. Press the PlayLink icon, then select the
correct input from the list.
Once you have selected the input, press back, then select conguration.
PlayLinkisactivatedanddisabledthroughthePlayLinkiconontheCAN-Bus
conguration screen.
 previous next