Filter
Top Products
8
serial number e serial number for your power amplier is found on the rear of the unit.
Please note and record this number on the page entitled Important Safety
Instructions for your future reference.
operating voltage e operating voltage of your AMP5 is 100-240 V, 50/60 Hz.
Warning: There are no user-serviceable parts within the unit. Please
refer any problems to an authorized Classé service center.
e amplier can easily be powered by a normal 15 or 20-ampere AC mains
line. If other devices are also powered from the same AC line, their additional
power consumption should be taken into account.
warm up/break-in period Your new Classé power amplier will deliver outstanding performance
immediately. However, you should expect to hear it improve somewhat as
it reaches its normal operating temperatures and its various components
“break-in.” It has been our experience that the greatest changes occur within the
rst 72 hours, as the amplier reaches thermal equilibrium and the capacitors
fully form. After this initial break-in period, the performance of your new
amplier should remain quite consistent for years to come.
please read this manual… Please take a few minutes to review this manual, and to familiarize yourself with
your new amplier. We understand that you are anxious to plug everything in
and get started. However, reading this manual and following the advice it gives
will ensure that you get all the benets you deserve from having purchased such
a ne piece of equipment.