Classe Audio CA-D200 Car Amplifier User Manual


  Open as PDF
of 28
 
25
Specifications
n Frequency response 10Hz – 20kHz, -1dB into 4Ω
n Output power 200W rms into 8Ω
400W rms into 4Ω
n Harmonic distortion <0.018% @ 1kHz Balanced Input
n Peak Output Voltage 116V peak to peak, 58V rms no load
116V peak to peak, 58V rms into 8Ω
n Input impedance 100kΩ Balanced / 50kΩ SE
n Voltage gain 29 dB
n Input level at clipping 1.4Vrms Balanced/SE
n Intermodulation distortion >80 dB below fundamental
into 8Ω Balanced
n Signal-to-Noise Ratio -100 dB at peak output into 8Ω (AES17)
n Standby power consumption <1W @ 230V
n Rated power consumption 177W @ 1/8th power into 4Ω
n Mains voltage 90V - 264V, 50/60Hz
n Overall Dimensions Width: 17.50” (445mm)
Depth (excluding connectors): 16.50” (419mm)
Height: 4.78” (121mm)
n Net weight 28.0 lbs (12.70 kg)
n Shipping weight 37.0 lbs (16.30 kg)
All tests un-weighted and 20Hz – 20kHz measurement bandwidth used.
For more information, see your Classé dealer, or contact:
B&W Group Ltd.
5070 François Cusson
Lachine, Quebec
CanadaH8T1B3
Telephone +1(514)636-6384
FAX +1(514)636-1428
Internet: http://www.classeaudio.com
email: cservice@classeaudio.com
Classé and the Classé logo are trademarks of B&W Group Ltd., Worthing U.K. All rights reserved.
AMX®isaregisteredtrademarkofAMXCorporationofRichardson,TX.Allrightsreserved.
Crestron™isatrademarkofCrestronElectronics,Inc.ofRockleigh,NJ.Allrightsreserved.
Control4™isatrademarkofControl4CorporationofSaltlakeCityUT.Allrightsreserved.
 previous next