Filter
Top Products
18
Installation
Your new Classé amplier is quite simple to set up and enjoy. Please follow the
steps outlined below in order to safely set up and use your new amplier.
Important:
The AC mains connection should be the last connection you
make on your new power amplifier. In addition, it is always
a good idea to power up your power amplifier(s) last, after
everything else has been powered up and has stabilized. .
Conversely, it is good practice to power the amplifier(s)
down first when shutting down the system, as this
prevents any transients from other components from
getting through to your loudspeakers.
1. Unpack everything according to the included instructions.
Be careful when doing so, as this amplier is quite heavy.
2.
Place your amplifier (be sure to read “Unpacking and Placement”)
and connect it to the AC mains. is includes deciding on the location,
making sure you have adequate ventilation, and adequate clearance for all the
wires behind the amplier. Once accomplished, connect the amplier directly to
the AC mains. Do not use extension cords, as most are not suitable for the current
sometimes required by your amplier.
CT-M600 rack-mount
installation
FORRACKMOUNTINGINSTALLATIONCONTACTYOURCLASSÉ
PROFESSIONAL.
CT-M600 stand-alone
installation instructions
NON-RACK-MOUNT INSTALLATION FOR CT-M600:
1a. Install (4) feet and secure with (4) #6 at washers and
(4)6-32X9/16philipspanheadscrews.
Tighten to
5.0 in-lbs (0.56 N-m)