Filter
Top Products
13
The Standby LED lights up when the
Power Adapter is connected to the
mains. Press the Power button to turn
on the Decoder Amplifier.
The CMSS Music LED will remain
illuminated after initial start-up. The
last used CMSS mode’s light will
illuminate for subsequent start-ups
from system standby mode.
The Optical LED also lights up after
initial start-up. The last used Dolby
Digital/PCM Audio input’s light will
illuminate for subsequent start-ups
from system standby mode.
The Digital DIN or Line In LED
lights up, depending on whether
Digital DIN or Analog Line In is
connected. The Digital DIN LED will
blink if a PC connected to the Decoder
Amplifier is off but a Digital DIN
input is connected. Turning on your
PC stops the LED’s blinking.
The indicator light for Dolby Digital
will illuminate automatically if a
Dolby Digital program is playing.
That is, when a Dolby Digital signal
passes through the Decoder’s
processor via the Optical,Coaxial or
Digital DIN (Dolby Digital/PCM Audio)
inputs.
1.
POWER
:
Sets the system to “On”
or standby. When set to “On”, the
Standby LED above the power
button turns off.
2. SUBWOOFER, CENTER AND
SURROUND
:
These controls
adjust the level of the indicated
channels. Their output level
should be balanced with the fixed
output level of the Left and Right
front Satellites.
3.
MASTER
:
Adjusts the volume of
the entire system. The Master
volume knob is servo controlled
via the Remote Control.
4.
CMSS
:
CMSS
(Creative Multi
Speaker Surround)
processes
analog program material.
Repeated presses of this button
step through four different
operation modes.
MOVIE
: Creates a 5.1 speaker
soundfield appropriate for movie
or game enjoyment from an
analog sound source.
Decoder Amplifier Functions
2
9
6
7
1
3
4
10
5
8
10
11
12
Legend
Button
LED