Filter
Top Products
control or on the docking station panel to stop searching.
2) Selecting channel
Press CH+/- buttons on remote control or on the docking station panel to choose
channel up or down.
The numeric buttons (0,1~9) allows toselect the corresponding channel directly.
3) Screen display
Press DSP button on remote control or on docking station panel to display the
current status such as TVch. If there is no operation for more than five seconds,
the information on the screen will disappear.
Other Operation
1) Dome Lamp Switch
There are two dome lamps on the docking station, you can use dome lamp switch
to turn it on or off.
When the switch is on AUTO position, if you open the door of the car, the lamp will
turn on, when the door closed, the lamp will turn off.
2) FM Transmitter Function
Press FMT button on the docking station panel to change the transmit frequency or
turn the FM transmitter on or off. The transmitting frequency can be selected from
97.5M to 107.9M. One step below 97.5 and one step above 107.9 is FM off
FM can also be turned off with FM button on the remote control.
26
© 2006 Directed Electronics—all rights reserved