Filter
Top Products
13
© 2002 Directed Electronics, Inc.
■
Accessory - The RED wire should be con-
nected to a fused (+) 12 volt wire that
turns on/off with the key.
■
Ground - The BLACK wire should be con-
nected to a chassis ground, preferably
scrap sheet metal.
■
AV Input - Connect to MCB1000 or AV
source.
■
IR Connector - Connect to MCB1000 or AV
source
NOTE: When using the MCB1000 with the OHC100, to
only use the DIN to DIN cable supplied with the
MCB1000, not the DIN to RCA cable. The DIN to
RCA is only for use without the MCB1000.
Wiring Guide