Filter
Top Products
Mounting instruction
100
Notes
To prevent unconnected leads from shorting out, insulate
them by wrapping their tips with electrical tape. Similarly,
insulate the ends of connected leads.
If an external amplifier is to be connected to the receiver,
be sure to ground its outside housing to the vehicle body
(a metal part).
Names of lead wires and destinations
(refer to Page 102)
No. Name Wire color Destination
1 ACC Red Connect where the power comes on
when the ignition is in the ACC
position.
2 B+ Yellow Connect where the power is constantly
available, regardless of the ignition
switch's position.
3 Ground Black Connect where good body grounding
is available.
4
Antenna power supply
Blue Connect to the automatic-antenna
control terminal of the vehicle.
5
Lamp power supply
Orange/White
Connect to where power comes on
when the headlights are turned on.
6
Control power supply
Blue/White
Connect to the control terminal for the
external amplifier, etc.
7 E-LAN terminal Connect to the E-LAN terminal of the
CD changer, DSP, etc.
8 & 9
Line-in/out terminals Connect to the RCA input connectors
of an external amplifier, or to the RCA
output connectors of a DSP or EQ.
10
Line-out terminals (Nonfader)
Connect to the RCA input connectors
of a DSP or EQ, or the RCA input
connectors of a woofer amplifier.
11
Speaker terminals
Connect them to their respective
speakers.
12
Cellular phone mute
Pink Connect to the ground output terminal
on a mobile phone.
13 Digital out terminal Connect to digital input terminal
of the Eclipse Commander module.
14 Eclipse Commander Connect to the Eclipse Commander
terminal module.
15 Line in terminal (for MP3) Connect to the mini plug (
φ3.5
output connector of MP3 unit.