Filter
Top Products
91
[FUNC] button
Button [5]
How to operate the receiver with an optional DSP/EQ unit or Digital Sound Processor connected
Switching the surround playback mode
1. Press the [FUNC] button.
2. Press button [5].
The surround mode will changes in the following order
each time the button is pressed.
<For digital input>
Do not change the setting if DTS signals are being
played.
<For analog input>
or will appear on the display.
3. Press the [FUNC] button again.
Dolby Digital Down-mixed 2-channel playback
PCM (2-channel playback) Dolby Prologic playback
Normal 2-channel playback Dolby Prologic playback