Eclipse - Fujitsu Ten CD8454 Car Stereo System User Manual


 
130
How to operate the Sound Adjustment Mode
This adjustment is for 3-way speaker system which uses
different speakers for different ranges (treble range: tweeters,
medium range: Mid, bass range: woofers). In this case, the
crossover function applies the HPF to the treble-range
speakers, it applies the HPF and LPF to the medium-range
speakers, and it applies the LPF to the bass-range speakers to
adjust the respective playback ranges so that the sounds from
all speakers merge properly.
Turn the [SEL] button to select X-Over.
The selected item will be highlighted.
Press the [SEL] button.
The mode will change to crossover adjustment mode.
Press the [SEL] button to select the crossover adjustment
channel.
Each time the button is pressed, the selection changes in
the following order.
Hi M-LPF M-HPF Low
Turn the [SEL] button to select the cut-off frequency.
When the button is turned, the frequency changes in the
following order.
Hi / M-LPF:
200Hz 250Hz 315Hz 400Hz 500Hz 630Hz
800Hz 1kHz 1.25kHz 1.6kHz 2kHz 2.5kHz
3.15kHz 4kHz 5kHz 6.3kHz 8kHz 10kHz
M-HPF / Low:
63Hz 80Hz 100Hz 125Hz 160Hz 200Hz
4
3
2
1
Crossover adjustment (X-Over)
[SEL] button