Filter
Top Products
129
How to operate the Sound Adjustment Mode
IX
SRS Circle Surround II (CS II)
The system achieves surround sound by combining SRS TruBass,
which uses the difference between two different frequencies to
boost bass tones, and SRS Circle Surround, which uses 2ch (L/R)
correlation to expand the sound.
Setting CSII modes
Turn the [SEL] button to select CSII.
The selected item is highlighted.
Press the [SEL] button.
The mode will change to CSII mode.
Turn the [SEL] button.
Turn the [SEL] button to set CSII modes as follows:
In the Hi and Low settings, Loud and Position can not be
changed.
Press the [SEL] button.
The selected settings will take effect.
Press the [ ] button.
When CSII is HI or Low, TruBass can be turned ON/OFF.
Press the [RTN] button.
At this time, other adjustments can also be made in normal mode.
Press the [SOUND] or [RTN] button to exit sound
adjustment mode.
If the CS II mode has been set (to a setting other than OFF), the BAL
(balance) and FAD (fader) settings will be canceled.
[SEL] button
[ ] button
[SOUND] button
Low OFF HI
CD8455.book 129 ページ ２００４年１２月１１日 土曜日 午後７時２４分