Eclipse - Fujitsu Ten CD8455 Car Stereo System User Manual


 
106
How to operate the tuner
How to operate the tuner
First, press the [FM AM] button to start tuner operation.
There are automatic and manual methods for setting stations in memory.
The receiver will accept up to 24 stations in memory: 6 in AM and 18 in FM
(6 each for FM1, FM2 and FM3.) (Initial setting)
Tuning to a station
Press the [FM AM] button for less than one second to
switch to the desired FM or AM bands.
Radio bands will switch from FM1 FM2 FM3 AM in order
each time the button is pressed.
Turn the [SEL] button to the left or right to tune to a
station.
Turn to the right:Tunes to higher frequencies.
Turn to the left: Tunes to lower frequencies.
Press the [ ] or [ ] button to start the automatic station
search.
[ ] button: Starts searching toward higher frequencies.
[ ] button: Starts searching toward lower frequencies.
At times, it may be difficult to maintain optimum reception because
the antenna affixed to your vehicle is in motion constantly (relative
to the broadcast antenna), encountering continuous variation in the
received radio signals’ strength. Other factors affecting reception
include interference from natural obstacles, sign posts, etc.
When an optional HD Radio tuner unit is connected, digital
broadcasts have reception priority. (U.S.A. only)
[ ] button
[FM AM] button [SEL] button [ ] button
CD8455.book 106 ページ 2004年12月11日 土曜日 午後7時24分