Eclipse - Fujitsu Ten CD8455 Car Stereo System User Manual


 
126
How to operate the Sound Adjustment Mode
Automatic parametric equalizer correction
This can be used to automatically correct distortion in frequency
characteristics (peaks and dips) based on the results of
measuring the frequency characteristics inside the vehicle.
Automatic parametric equalizer correction is carried out in the
following steps.
Frequency characteristic measurement
(Refer to
"Measuring/display frequency characteristics" on
pages 133 and 158 for details.)
Saving sound quality data
(The folders and files that are required for E-iSERV sound
effect customizations are created automatically when the data
is written to the Memory Stick. Refer to
"Measuring/display
frequency characteristics
" on pages 133 and 158 for details.)
ECLIPSE web site accessing
(Access the following URL: http://www.e-iserv.jp)
Automatic parametric equalizer adjustment
(Follow the instructions given on the web site.)
Correction data downloading
(Follow the instructions given on the web site.)
Correction data reading
(Refer to "Importing Sound Data" on page 146 and 170 for details.)
Time alignment and crossover adjustment
(Refer to
"Time alignment adjustment" on pages 136 and 161
and "Crossover adjustment" on pages 142 and 163 for details.
In addition, adjustment and settings can be carried out using
the ECLIPSE web site.)
CD8455.book 126 ページ 2004年12月11日 土曜日 午後7時24分