Eclipse - Fujitsu Ten CD8455 Car Stereo System User Manual


 
119
How to operate the Sound Adjustment Mode
IX
How to operate the Sound Adjustment Mode
About Sound Adjustment Mode
This deck is equipped with two different sound adjustment modes: normal
mode and pro mode.
In normal mode, the acoustic characteristics inside the vehicle can be
adjusted using comparatively simple settings. In addition, it corresponds to
basic sound systems which comprise front speakers, rear speakers, and
subwoofer.
In pro mode, the sound quality characteristics can be adjusted item by item
using more sophisticated settings than in normal mode. In addition to the 4
speaker system, the adjustments can be made to suit 3-way speaker
system where the front speaker, rear speaker and non-fader output can be
set to Hi (treble range) Mid (medium range) or Low (bass range). Refer to
the table below and to the operations for each mode for details of each
mode.
The following adjustments can be made in normal mode and pro mode
respectively.
Normal mode Pro mode
SRS Circle Surround II
(See page 129)
Parametric equalizer
(See page 130) (See page 150)
Time alignment
(Simplified)
(See page 136)
(See page 161)
Crossover
(See page 142) (See page 163)
Multi-harmonizer
(See page 143) (See page 166)
Non-fader phase
(See page 144) (See page 167)
Non-fader output
(See page 145) (See page 168)
Speaker layout
(See page 169)
Custom mode
(See page 172)
Sound data
(See page 146) (See page 170)
E-iSERV sound effect
customizations
(Parametric equalizer)
(See page 125) (See page 125)
E-iSERV sound effect
customizations
(Time alignment)
(Simplified)
(See page 125)
(See page 125)
CD8455.book 119 ページ 2004年12月11日 土曜日 午後7時24分