Not for Commercial Use - Ericsson Inc.
14 Voice Operation
(including email addresses) to be saved to, or erased from, the
phonebook.
Language
The submenu allows you to select the language used in
the phone display. The languages vary between markets. Your mobile
phone supports English, French, Spanish, and Portuguese.
Display
The submenu is used to change the Backlight, Banner, and
Time display of your phone.
Backlight
Use the submenu to set the display and keypad backlight-
ing to stay Off or to automatically turn On for 20 seconds when a
call is received or a key is pressed. The two settings for
are
Auto and Always Off.
Change Banner
Use the submenu to alter the information that is
displayed when your phone is in standby. You can enter whatever
message you would like to see (up to one line of text).
Time Format
The time in your phone’s display will always be current because it is
updated by your network. You have the option to set the time to am/
pm or 24-hour format.
System Options
The submenu allows you to select what system you
wish to use. There are three options in the
sub-
menu: Auto System, System Select, and Next Call Analog.
Auto System
If your phone is programmed with two phone numbers, Auto Sys-
tem will use both numbers when attempting to find a network. Auto
System options include On and Off.
System Select
If you select System Select, you can choose from:
•
Standard-
The phone will attempt to use the digital network first.
If not available, it will switch to analog. If neither the digital nor
analog home systems are available, the phone will select the digital
non-home system, or the analog non-home system.
•
A Only
- The phone is forced to use A side operators only (digital
first, analog if digital is not available).
•
B Only
- The phone is forced to use Analog B side operators only
(digital first, analog if digital is not available).
•
Home Only
- The phone will stay on the home system.
Note!
and may be available in some networks.
Next Call Analog
Choosing Next Call Analog will force the phone to be in analog
mode on the next incoming or outgoing call. This allows you to
receive an analog fax or data call. The setting will remain for 10 min-
utes. Next Call Analog options are Yes and No.