Filter
Top Products
Not for Commercial Use - Ericsson Inc.
Wireless Modem Operation 35
7 If your computer has a PCMCIA slot a window may appear ask-
ing, “
What type of modem do you want to install?
” If you are asked
this question, select
Other
, then click
Next
. If you are not asked
this question, proceed to the next step.
8 If you are running Windows 98 or ME, a message beginning with
“
There appears to be a new port or modem adapter in the computer
”
may appear. If it does, check the box labeled
Don’t run the Hard-
ware Installation Wizard,
then click
Next
. If this message does not
appear, proceed to the next step.
9 Check the
Don’t detect my modem; I will select it from a list
box.
Click
Next
.
10 Click
Have disk
, then click
Browse
. Navigate to the modem driver
(INF file) you downloaded in step 1. Click
OK.
Click
OK
again.
11 Select the modem you want to install, then click
Next.
Note! If you do not know which modem you need, check with your mobile
service provider to determine the data service you have.
12 Select the COM port to which you are connecting the phone.
Click
Next
.
13 A window may appear asking for location information, such as
the country you are in and your area code. If it does appear, you
must enter this information before you can proceed. When fin-
ished, click
OK
. If this window does not appear, proceed to the
next step.
14 Click
Finish.
The A1228c is now installed on your PC.
Windows 2000
1 You must be logged on with administrator privileges before pro-
ceeding. Contact your network administrator or help desk for
more information.
2 Download the INF file from http://mobileinternet.ericsson.com
.
3 Turn on your Ericsson mobile phone.
4 Connect one end of your serial cable to your Ericsson mobile
phone and the other end to your computer’s serial port.
5 Navigate to
Start, Settings, Control Panel, Phone and Modem
Options.
6 A window may appear asking for location information, such as the
country you are in and your area code. If it does appear, you must
enter this information before you can proceed. When finished,
click
OK
. If this window does not appear, proceed to the next
step.
7 Select the
Modems
tab. Click the
Add
button.
8 Check the
Don’t detect my modem; I will select it from a list
box.
Click
Next
.
9 Click
Have Disk.
Click
Browse
. Navigate to the INF file you down-
loaded in step 1. Click
Open.
Click
OK
.
10 Select the modem you want to install, then click
Next.
Note! If you do not know which modem you need, check with your mobile
service provider to determine the data service you have.
11 Select the COM port to which you are connecting the phone.
Click
Next
.
12 A message titled “
Digital Signature Not Found
” will appear. Click
Yes
to proceed.
13 Click
Finish
. Click
OK
.