Filter
Top Products
8. TIME SYNCHRONIZE: Select “ON” or “OFF” to enable or disable time synchronize which
will automatically update the DVR’s time when connected to a network. To change this, simply use
the Jog Dial on the DVR.
9. TIME SERVER: You can set the time server address that the DVR connects to for time
synchronize. To determine the IP address of NTP Server, please follow these steps:
a) Go to a PC that is connected to the internet.
b) Click on “START” -> “RUN” -> type “cmd” and press “OK”.
c) In the Dos Prompt, type “ping pool.ntp.org” to find out the IP address of an NTP Server.
Diagram 3.3
9. TIME ZONE: You can set the time zone that the DVR adjusts to when updating from the time
server.
Atlantic Daylight Time subtract 3 hours from GMT
Atlantic Standard Time subtract 4 hours from GMT
Eastern Daylight Time subtract 4 hours from GMT
Eastern Standard Time subtract 5 hours from GMT
Central Daylight Time subtract 5 hours from GMT
Central Standard Time subtract 6 hours from GMT
Mountain Daylight Time subtract 6 hours from GMT
Mountain Standard Time subtract 7 hours from GMT
Pacific Daylight Time subtract 7 hours from GMT
Pacific Standard Time subtract 8 hours from GMT
Alaska Daylight Time subtract 8 hours from GMT