Filter
Top Products
3.11.3 NO HDD
In NO HDD, we define:
Diagram 3.22
1. BUZZER: NO HDD buzzer.
ENABLE: To enable a buzzer when no HDD has been found.
DISABLE: To disable NO HDD buzzer.
2. ALARM OUTPUT: This will transmit a signal to another device. The setting of alarms are
NONE = not activated, 1 = output signal 1 transmitted. To change this, simply use the Jog Dial
on the DVR.
3. ALARM DURATION: Buzzer noise and event record duration of an alarm, from 1 sec to 99
seconds or permanent. The default value is 5 seconds.
4. NETWORK ALARM:
YES: To enable network alarm.
NO: To disable network alarm.