Filter
Top Products
To connect the G61 to Meridian DSP loudspeakers
$30n-!).2
$30n-!).,
3PATCHBOX
$30#
'$IGITAL3URROUND#ONTROLLER
$)')4!,/54054
#/--3
#/--3
/54054 ).054
$)')4!,).0543
3,%!$
3,%!$DIGITALUNUSED
3,%!$
-,%!$
$)')4!,
/54054
#/--3
/54054
).054
$)')4!,
).0543
$)')4!,
/54054
#/--3
/54054 ).054
$)')4!,).0543
$)')4!,
/54054
• Use the Comms part of an M5 lead to connect one of the
COMMS sockets on the G61 to the digital speaker you have
chosen as the master (typically the centre speaker).
• Use the audio part of the M5 lead to connect the digital speaker
to the appropriate digital output socket.
If the system includes more than two Meridian DSP loudspeakers
you will need a 511 S-patch box (available separately) to link
together the S5 leads from each speaker.
• Connect the COMMS output from the master digital speaker to
one socket on the 511 using an S5 lead.
• Link each pair of speakers together with an S5 lead, out of
the first speaker and into the second speaker, as shown in the
diagram for the main L&R.
• Connect the inputs to the first speaker of each additional pair to
the 511 (Comms) and the appropriate output of the G61 (audio),
using an S5 lead.
The speakers should then be configured appropriately as master
and slaves, and Left, Right, Centre, Surround; see
Meridian DSP
Loudspeaker User Guide
for more details.
Installing the
digital surround
controller
10