Filter
Top Products
Calibrating
the system
31
The display shows:
Chan óòô öõú ExitSound
CD Sine 80.0Hz
An 80Hz sinewave will be played through all channels.
You can change the test signal using the menu keys, as described
in the following sections.
To select the channel
• Press Chan.
You can select any individual channel, or All Channels.
To change the sweep rate
• Press A or V to change the sweep rate and direction, as
follows:
Display Description
Chan óòô öõú ExitSound
CD >> 88.5Hz
Fast sweep up.
Chan óòô öõú ExitSound
CD > 81.5Hz
Slow sweep up.
Chan óòô öõú ExitSound
CD Pause 80.0Hz
Paused.
Chan óòô öõú ExitSound
CD < 78.5Hz
Slow sweep down.
Chan óòô öõú ExitSound
CD << 70.5Hz
Fast sweep down.
To change the volume
• Use the volume keys in the usual way.
To change the input
• Press Sound.
You can select between the following inputs:
Option Description
Input The current input.
Sine A sinewave.
Noise Pink noise, band bass 500Hz to 2kHz for main
channel.
Silent Silence.
Alternatively you can switch between inputs using the menu keys
on the MSR+.