Filter
Top Products
U.S.A
.
BBWX2 INSTALLATION GUIDE
Page 10 of 15
100
Link/Act
10/100 4-Port SwitchSatellite Receiver
Status
U.S.A.
1
234
3.4 Turning Power ON, LED function
Power ON
No operation is required for the user. Simply turn on the BBWX2’s DC power source to
power it.
Note: When the BBWX2 is used as a switch, make sure to power it before any other Network
Devices (MFDs)
BBWX2 LEDs
The LEDs are displayed on the top surface of the unit as shown below.
Receiver LED display
There is a single, multi-color LED that provides the status of the Receiver. Generally, when
the LED is GREEN – normal operation; when AMBER – anomalous but trivially fixable
operation required; when RED – something has failed. See the Troubleshooting section for
more details on the LED status/conditions.
Switch LED display
There are LEDs to monitor the LAN communications on the unit. The indicator LEDs blink or
go off according to the equipment status as in the table shown below. The LEDs show link
and data rate.
When the equipment is first powered-up, the power on sequence is as follows:
Receiver LED: Initially ON (Green)
Switch LAN LEDs: All blink once (first 100 row, then Link/Act row), then go off (when
no port activity is detected).