Filter
Top Products
U.S.A
.
BBWX2 INSTALLATION GUIDE
Page 14 of 15
5.4 Troubleshooting
The LEDs on the unit indicate the following conditions:
Satellite Receiver LED Status Actions
GREEN – single long
green every 3 seconds
Normal Operation None
AMBER – two flashes
(long-short) every 3
seconds
Display not Connected
Connect MFD display to BBWX2,
Turn on display, or
Replace Ethernet cable
AMBER – three short
flashes every 3 seconds
Antenna not connected Check antenna cable connections
AMBER – alternating
between the two above
conditions
Both Antenna and Display
not connected
Connect Display and Antenna
RED – repeating short
red flashing (on/off for
equal intervals)
Ethernet failure Unit failure. Call Dealer
RED – repeating long red
flash (on longer than off)
Sirius module failure Unit failure. Call Dealer
RED – alternating
between the two above
Sirius and Ethernet failure Unit failure. Call Dealer
RED – repeating group of
three short red flashes
Antenna shorted
Check antenna cable, or
Replace antenna cable (if damaged)