Filter
Top Products
U.S.A
.
BBWX2 INSTALLATION GUIDE
Page 13 of 15
Power
12-24V
Audio1 Audio2
Antenna
Network Ports
1
2
4
3
4 3 2 14 3 2 1
Power Sync
On/Off
5.3 Power synchronization
When connecting with PC(s), use shielded
2 pair Ethernet cable and set the applicable
network port toggle switch(es) to OFF.
When multiple MFD8/12/BBs are connected to the BBWX2 switch, using shielded 4 pair
Ethernet cables, you can synchronize power to all of them by turning just one of them on.
The port number of the toggle switch on the connector panel maps to a physical Network port
as shown in the connector panel drawing below.
Turn the toggle switch on (to the left, when unit is oriented as above), to enable the power
synchronization.