Filter
Top Products
54
You can then rotate the Encoder Volume Control to select
from the following pre-set display colours:
WHITE: GREEN1: GREEN2: GREEN3: AMBER: PINK1:
PINK2: PURPLE1: PURPLE2: BLUE1: BLUE2: USER
COLOUR: ORANGE
Press the ESC/RGB button to confirm your selection.
See Page 10 for details on how to set the USER COLOUR
REMOVAL/RE-ATTACHMENT
OF THE FACE
1. Press the Panel OPEN button.
2. After flipping down the front panel, push it to the right (A),
then draw the left of the front panel outwards (B)
3. To re-attach the face, please complete the above steps in
reverse.
DASHBOARD
INSTALLATION
The following illustration shows a typical installation.
If you have any questions or require information regarding
installation kits, consult your car audio retailer.
If you are not sure how to install this unit correctly, have it
installed by a qualified installer.
STORE DEMO MODE
When you connect the unit for the
first time and press the Mute/Power
button the unit will operate in
Demo Mode. To exit Demo Mode ,
press the Mute/Power Button again.
See Page 10 to turn Demo Mode off.
2. Hold the left-hand side of the Face and pull forward
3. Pull the Face towards you (1) to disengage it from the chassis (2).