Filter
Top Products
www.gateway.com
5
Card Reader
The Card reader is on the left hand side of the monitor as shown and supports XD/SD/MMC/MS.
In order to use the card reader, your monitor needs to be connected to your computer using the
supplied USB A-B cable.
Connecting the power
Connect the power:
1 Position your monitor so you can reach the back, then connect the power cord to the power
connector at the back of the monitor.
2 Plug the power cord into a correctly grounded power outlet. We recommend using a surge
protector to protect your monitor from voltage spikes.
3 To make sure that the monitor’s power is correctly connected, check the power button on
the right hand side. The power icon on the power button should be glowing purple. If the
power icon is not visible, power is not connected.
Card Reader
(Option)