Grace GDI-IR2000 Car Stereo System User Manual


  Open as PDF
of 44
 
11
Grace Wireless Internet Radio
Steps For Connecting Your Radio To Your Wireless
Network (Continued)
If the screen displays either:
Enter WEP key
Or:
Enter WPA key
Thenyournetworkisusingoneoftheencryptionsystems:WiredEquivalentPrivacy(WEP)or
Wi-FiProtectedAccess(WPA).YouthereforeneedtoenterthecorrectWEPorWPAcodeinto
the radio to get it to communicate with your network.
Only the person who set up the network in the first place knows this code; if that person is not
you then you need to find out what the password / security code is.
After 3 seconds, the display goes into the code entry mode. To enter the code, use the knob
to select each character of the code in turn, pressing the ‘Select’ button inwards after each
character.NotethatWEPandWPAcodesaresensitivetoupperandlowercasecharactersso
you must enter them exactly.
Use the BACK button to erase incorrect characters.
Afterthenalcharacter,usetheknobtoselecttheENDcharacterandpressthe‘Select’
button.
The radio should now be able to connect to the network. Your password will be saved in your
Grace radio even if a power outage occurs.
Ifthedisplayshows“Invalidkey”or“NetworkError”,anincorrectpasswordhasprobablybeen
entered.
Then:
Network OK
 previous next