Filter
Top Products
13
BEEP function
Press and hold SEL knob for 2 seconds; the display will show “TA SEEK”. Press SEL knob repeatedly until the display
shows “BEEP OFF”, rotate SEL knob to toggle between BEEP ON and BEEP OFF, then leave the unit idle for your
desired setting to take effect.
Clock setting
The clock can be set anytime when the power is on. Press CLK button and then press and hold CLK button for 3
seconds, the time will blink on the display.
1. Rotate SEL knob clockwise to adjust the hour.
2. Rotate SEL knob anti-clockwise to adjust the minute.
3. Press CLK button again or leave the unit idle for new setting to take effect.
Press CLK button anytime to view the time display.
DSP mode
Press and hold SEL knob for 2 seconds, the display will show “TA SEEK”. Press SEL knob repeatedly until the display
shows “DSP OFF”. Rotate SEL knob to select DSP effect.
POP ROCK CLASSIC FLAT DSP OFF
After you have selected your desired effect, leave the unit idle in order for the new setting to take effect.
Preset volume level
Press and hold SEL knob till the display shows “TA SEEK”. Then press SEL knob repeatedly till “VOL LAST” is
displayed. In this mode the unit will be turned on with the same volume level at which the unit was shut down last time.