Filter
Top Products
15
Radio operations
Choose Radio Band
Press BAND button to activate the Radio mode. The unit is equipped with 3 FM bands (FM1, FM2 and FM3) and 2 AM
bands (MW1 and MW2). Each of the bands can store up to 6 preset stations, making total 30 preset memory stations.
Radio Tune/Seek Function
In Radio mode, press PREV/NEXT buttons to manually adjust the radio frequency.
Auto seek modes
Press and hold SEL knob until “TA SEEK” is shown on the display, then press SEL knob to cycle through the menu
selections until “SEEK 1” is shown. Rotate SEL knob to select either “SEEK 1” or “SEEK 2”.
1. Seek 1: press and hold PREV/NEXT buttons for more than 1 second. The unit will seek the next strong and clear
frequency station. Repeat to seek more stations in your listening area with a strong signal.
2. Seek 2: press and hold PREV/NEXT buttons for station search. The search will not cease until you release the
button.
Mono/Stereo Reception Control
In FM radio mode, press and hold SEL knob till the display shows “TA SEEK”, then press SEL knob repeatedly until
the display shows “MONO”. Rotate the SEL button to toggle between mono reception or stereo reception. The display
will show “MONO” or “STEREO”. Improvement of reception of distant stations can be done by selecting “MONO”
operation, which may cut down some reception noise.