Filter
Top Products
8
Installation method B
Note: Outer trim frame, hook, and mounting sleeve are not used for this
installation.
This is only intended as a general guide; contact the vehicle's
manufacturer for specific instructions.
This method of installation uses the screw holes at the sides of the unit
and the holes of the existing vehicle mounting bracket.
1. Remove the hooks on both sides.
2. Align the screw holes of the mounting bracket supplied with the car
and the screw holes of the main unit. Tighten the 2 screws on each
side of the unit. Then fasten the brackets to the car.
3. Attach wires of the unit to existing speaker wires. See wiring
diagram.