Filter
Top Products
16
Digital tuner operations
Note: RDS (Radio Data System) service availability varies with areas. Please understand if RDS service is not
available in your area, the following service is not available, either.
Band selection
Press the BAND / P/N button on the RC or BND / PLAY/PAUSE button on the panel to select a band: FM1,
FM2, FM3, AM. Display will show the wave band, frequency.
Automatic/ Manual tuning
Automatic tuning: Press the / button on the RC to start auto searching the station.
Manual tuning: Press and hold for 2 seconds the / button on the RC, press repeatedly the / button to
start manual searching the station. When the button is pressed, the station is sought in the direction of higher
frequencies. If the button is pressed, the station is sought in the direction of lower frequencies.
Auto store
You can store up to a total of 24 radio stations in the memory (18 FM, 6 AM), manually or automatically.
• To store a station:
- Select a band (if needed)
- Select a station by / on the RC.
- Hold a Preset button (1-6) which you want to store the station for at least 2 seconds.
• To recall a station:
- Select a band (if needed)
- Press a Preset button (1-6) briefly to recall the stored station.