Filter
Top Products
22
Band selection
Press the BND/TITLE button on the RC or on the touch screen to switch to the bands in the following order:
FM1 - FM2 - FM3 - AM1 - AM2 (for two bands); FM1 - FM2 - FM3 - MW - LW (for three bands).
Manual/automatic tuning
Manual tuning: Press / buttons on the RC repeatedly to select a station upward or downward step by
step.
Automatic tuning: Press and hold for more than 3 seconds / buttons on the RC or cursor buttons on
the head unit to start automatic seeking for an available radio station downward or upward. After being
found the station will be played.
DX/LOC Selector
During radio mode, press LOC/SUB-T button on the RC to select strong or weak station reception. LOC
appears on the display and only local stations are available. When you turn it off both distance and local
stations can be received.
Note: The function is invalid in AM tuning.
Selecting the Stored Station
During radio mode, press / buttons on the RC or correspondent cursor buttons on the unit to select the
stored station upward/downward.
MO/ST Selector
During radio mode, you can press ST/AUDIO button on the RC to select mono mode or stereo mode. Stereo
reception is on when MONO disappears on the display. It is switched to mono mode when MONO appears.
Note: The function is available only in FM tuning.