Filter
Top Products
6
2
PANEL DESCRIPTION
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
[6•
SKIP
]
➥ Input digit “6” during frequency input, memory
channel selection, etc. (pgs. 17, 26)
➥ After pushing [FUNC], sets and cancels skip
setting for memory scan during memory mode.
(p. 37)
[7•
PRIO
]
➥ Input digit “7” during frequency input, memory
channel selection, etc. (pgs. 17, 26)
➥ After pushing [FUNC], starts priority watch.
(p. 38)
[8•
SET
]
➥ Input digit “8” during frequency input, memory
channel selection, etc. (pgs. 17, 26)
➥ After pushing [FUNC], enters into
SET MODE
.
(p. 47)
[9•
H
/
M
/
L
]
➥ Input digit “9” during frequency input, memory
channel selection, etc. (pgs. 17, 26)
➥ After pushing [FUNC], switches transmit power
between high, middle and low output power.
(p. 19)
When the transceiver becomes hot during
high or middle output power operation, the
built-in protection circuit activates to reduce
the transmit output power to 3 W
(approx.).
[0•
OPT
]
➥ Input digit “0” during frequency input, memory
channel selection, etc. (pgs. 17, 26)
➥ After pushing [FUNC], selects an optional func-
tion mode, such as pager or code squelch op-
eration. (pgs. 45, 46)
[#•
BANK
]
After pushing [FUNC], enters a memory bank se-
lection. (p. 30)
[✱
ENT
•]
➥ Sets the frequency even if the full 6 digits of
frequency have not been entered. (p. 17)
➥ After pushing [FUNC], switches key lock func-
tion ON and OFF when pushed and held for 1
sec. Lock all keys, except [PWR], [PTT],
[MONI] and audio level adjustment. (p. 20)
ENT
B
A
N
K
0
O
PT
9
H
/
M
/
L
8
SET
7
PRIO
6
S
K
IP