Filter
Top Products
ENGLISH
ENGLISH
14 OPERATING THE MONITOR
ADJUSTMENT MENU CONTENTS
You can skip the Menu pages and display an adjustment scale directly by using the
following button operations.
l Brightness: Press the Brightness Button when the Menu is not displayed.
l Contrast: Press the Contrast Button when the Menu is not displayed.
l Signal Select: Press the Input Button when the Menu is not displayed.
l Auto Set-up: Press the Auto Button when the Menu is not displayed.
For ProLite H2130
l Volume: Press the Menu Button within 5 seconds after pressing the Brightness Button or
the Contrast Button during the direct adjustments above.
Direct
SWITCHING BRIGHTNESS / CONTRAST / VOLUME ADJUSTMENT
(The VOLUME adjustment is for ProLite H2130 only.)
To switch between Brightness, Contrast and Volume adjustments, press the Menu
Button within 5 seconds after pressing the Brightness Button or the Contrast Button
during the direct adjustments above.
Brightness Contrast Volume
SIGNAL SELECT (INPUT1 / INPUT2)
Select either INPUT1 or INPUT2 for the signal input when both of the signal inputs are
connected to a signal source.
In case of selecting “Auto” in the adjustment item: Auto Search,
select INPUT1 or INPUT2 automatically for the signal input by pressing the Input Button.
In case of selecting “Manual” in the adjustment item: Auto Search,
press the Input Button and then the Menu Button. Select the input signal (INPUT1 Analog
/ INPUT1 Digital / INPUT2 Analog / INPUT2 Digital) by pressing the + / – Buttons.
NOTE
n
n