Filter
Top Products
ENGLISH
ENGLISH
OPERATING THE MONITOR 15
* Adjust the User of Economy Mode when you are using the monitor in a dark room and feel the
screen is too bright.
Adjustment Item Problem / Option Button to Press
Menu : Picture Control
(Analog / Digital)
Too dark
Too bright
Brightness *
Contrast
Too dull
Too intense
Return to Menu
Highlight “Menu : Picture Control” again.
Analog / Digital Input
See page 14 for Direct adjustment.
Direct
Picture Control
'Screen
OSD... Function Info...
-
+
MENU
SELECT
Color Temp. / Matrix
Sharpness
1 2 3 4 5
You can change the picture quality from 1 to 5 (soft to sharp).
Press the + Button to change the picture quality in numerical
order. Press the – Button to change the picture quality in reverse
numerical order.
9300K
Normal Normal
Hi.Cont High contrast
Dark
Gamma
6500K
Dark
Reddish white (6500K)
Bluish white (9300K)
G (Green)
R (Red)
B (Blue)
Too weak
Too strong
User
Mode 1 Brightness of back-light is reduced by Approx.10%.
Mode 2
Economy Mode
User
Brightness of back-light is reduced by Approx.50%.
NOTE
n sRGB is an international
standard which defines and
unifies the difference of
color appearance between
equipment.
n You can not adjust the
Brightness, Contrast and
Gamma in sRGB mode because
those settings are locked.
sRGB modesRGB
Back-light is too dark
Back-light is too bright
M (Magenta)
Y (Yellow)
C (Cyan)
Direct
Direct
Gamma: approx.1.8, 2.0, 2.2 or 2.4 is selected.User
CAL
Calibration mode: Color appearance is set to the range
adjusted by an optional calibration sensor.
Matrix
Too light
Too deep